Main structure character Unwinder and Rewinder:Automatic cutting unit,tension closed-loop control,cantilever turret whirling stand with double arm & double station,web material rolled with air shaft with safely chuck. Printing: Use mechnical shaft for drive.Horizontal & vertical register system,also with pre-register.High precision and less waste. Doctor blade plays with double-axis,drive by independent motor.Ink is passed by ink transfer roll. Dryer: High efficiency and energy saving drying system. Control: Machine is logically controlled by PLC,7sets of AC vector motor tension control.Main components are imported.

Direction	From left to right
Print unit	8 color
Max reel width	1050mm
Max mechanical speed	220m/min
Max printing speed	200m/min
Unwind diameter	Φ600mm
Rewind diameter	Φ600mm
Plate cylinder	Φ120~Φ300mm
Print accuracy	Vertical ≤±0.1mm (Automatic) Horizontal≤±0.1mm(Manual)
Tension set range	3~25kg
Tension control accuracy	±0.3kg
Paper core	Φ76mm×Φ92mm
Pressure	380kg
Doctor blade movement	±5mm
Drying method	Electricity heating
Machine Power	296KW at electricity heating
Air pressure	0.8MPa
Water cooling	7.68T/h
Main motor power	15kw
Overall(Length*width*height)	17800×3800×3500（mm）
Machine weight	31t
Print material	PET        12~60μm   OPP         20~60μm              BOPP        20~60μm        CPP         20~60μm  PE            40-140μm  combination material  15~60μm Other similar material

Unwind part

Unwind structure	Turret rotate structure
Unwind	Outside installed
Tension control	Potentiometer detection, precision cylinder drive arm   control tension
Install type	Air expanding shaft type
Max diameter	Φ600mm
Web reel horizontal adjust	±30mm
Rotate frame speed	1r/min
Unwind motor	5.5kw*2
Tension set range	3~25kg
Tension control accuracy	±0.3kg
Max unwind web width	1050mm

In-feeding

Structure	Double roller, soft and steel combination
Tension detection	Angular displacement potentiometer
Tension control	Swing arm structure, Cylinder control
Steel roller	Φ185mm
Rubber roller	Φ130mm （Buna）  Shao（A）70°~75°
Tension set	3~25kg
Tension accuracy	±0.3kg
Soft roller max pressure	350kg
Wall board	Alloy cast iron, secondary temper

 Printing unit

Cylinder install type	Shaft-less
Press roller type	Axle piercing
Press type	Swing arm
Doctor blade structure	Three directions adjust doctor blade, cylinder control
Doctor blade movement	Linkage with main machine, connect main shaft
Ink pan	Open type ink pan, diaphragm pump recycle
Ball screw	Vertical ball screw adjust,  Horizontal manual adjust
Gear box	Oil immersion type gear transmission structure
Plate length	660~1050mm
Plate diameter	Φ120mm ~Φ300mm
Press roller	Φ135mm EPDM Shao（A）70°~75°
Max press pressure	380kg
Doctor blade movement	±5mm
Max ink immersion depth	50mm
Doctor blade pressure	10~100kg Continuously adjustable
Electrostatic elimination device	Electrostatic brush

Drying unit

Oven structure	Circular arc-shaped closed oven, negative pressure   design
Nozzle	Bottom part flat nozzle, upside multi-jet nozzle
Heating method	Electricity heating
Oven open and close	Cylinder open and close
Temperature control type	Automatic constant temperature control
Highest temperature	80℃ （room   temperature 20℃）
The material length in the oven	1-7 color material length 1500mm, nozzle 9 8th color material length 1800mm, nozzle 11
Wind speed	30m/s
Hot wind recycling	0~50%
Highest temperature control accuracy	±2℃
Max input volume	2600m³/h
Blower power	1-8 color 3kw

Cooling part

Cooling structure	Water cooling, self-refluxing
Cooling roller	Φ150mm
Water consumption	1T/hr per set
Function	Material cooling

Out-feeding

Structure	Two roller rolling
Soft roller clutch	Cylinder control
Tension detection	Angular displacement potentiometer
Tension control	Swing arm structure, precision cylinder control
Steel roller	Φ185mm
Soft roller	Φ130mm  Buna   Shao（A）70°~75°
Tension set range	3~25kg
Tension accuracy	±0.3kg
Soft roller max pressure	350kg
Wall board	Alloy cast iron, secondary tempering treatment

Rewind part

Structure	Two arm rotate frame
Pre-drive when change the roller	YES
Rewind type	Air expanding shaft
Max diameter	Φ600mm
Tension attenuation	0~100%
Rotate frame speed	1r/min
Tension set range	3~25kg
Tension control accuracy	±0.3kg
Web reel horizontal adjustment	±30mm
Rewind motor	5.5KW*2 sets

Frame and material go through

Structure	Alloy cast iron wall board, secondary tempering,   processing centre treatment
Distance between each unit	1500mm
Guide roller	Φ80mm(in the oven)    Φ100  Φ120mm
The length of guide roller	1100 mm

Other

Main transmission	ABB motor 15KW
Tension control	Seven motor closed loop tension system
Photocell register	Vertical automatic register
Electrostatic elimination device	Electrostatic brush

Accessories Plate Trolly 1 set    Film Trolly 1set Tools 1 set      Static observation 1 set Main configuration list

Name	Specification	Quantity	Brand
PLC	C-60R	1	Panasonic/Japan
HMI	7 inches	1	Taiwan/weinview
Rewind and unwind motor	5.5KW	4	ABB/China-Germany joint venture Shanghai
Feeding motor	2.2KW	2	ABB/China-Germany joint venture Shanghai
Main motor	15KW	1	ABB/China-Germany joint venture Shanghai
Inverter		7	YASKAWA/JAPAN
Static observation	KS-2000III	1	Kesai/China
Register	ST-2000E	1	Kesai/China
Electrical proportional valve			SMC/Japan
Low friction cylinder	FCS-63-78		Fujikura/Japan
Precision pressure reduce valve			SMC/Japan
Temperature controller	XMTD-6000		Yatai/Shanghai